Interfacial microstructure and mechanical properties of Ti3SiC2 ceramic and TC11 alloy joint diffusion bonded with a Cu interlayer

Reliable joints of Ti₃SiC₂ ceramic and TC11 alloy were diffusion bonded with a 50 μm thick Cu interlayer. The typical interfacial structure of the diffusion boned joint, which was dependent on the interdiffusion and chemical reactions between Al, Si and Ti atoms from the base materials and Cu interlayer, was TC11/α-Ti + β-Ti + Ti₂Cu + TiCu/Ti₅Si₄ + TiSiCu/Cu(s, s)/Ti₃SiC₂. The influence of bonding temperature and time on the interfacial structure and mechanical properties of Ti₃SiC₂/Cu/TC11 joint was analyzed. With the increase of bonding temperature and time, the joint shear strength was gradually increased due to enhanced atomic diffusion. However, the thickness of Ti₅Si₄ and TiSiCu layers with high microhardness increased for a long holding time, resulting in the reduction of bonding strength. The maximum shear strength of 251 ± 6 MPa was obtained for the joint diffusion bonded at 850 °C for 60 min, and fracture primarily occurred at the diffusion layer adjacent to the Ti₃SiC₂ substrate. This work provided an economical and convenient solution for broadening the engineering application of Ti₃SiC₂ ceramic.     

Investigation on La3+ and Dy3+ co-doped ceria ceramics with an optimized average atomic number of dopants for electrolytes in IT-SOFCs

In the present study, we investigate the fundamental properties of CeO₂ by selecting La³⁺ (57), and Dy³⁺ (66) as dopants with optimized average atomic number of 61.5, which lies in between Pm³⁺ (62) and Sm³⁺ (62) in accordance with the criteria for optimum doping. A system of co-doped ceria ceramics Ce_1–x–yLa_xDy_yO_2-δ ((x, y) = (0.00, 0.00), (0.025, 0.025), (0.05, 0.05), (0.075, 0.075), (0.10, 0.10), (0.00, 0.20) and (0.20, 0.00)) as electrolytes for intermediate temperature solid oxide fuel cells were successfully prepared by a well-known sol-gel auto-combustion route. In order to obtain dense samples, the prepared pellets were sintered in air at 1300 °C for 4 h using conventional furnace and relative densities of all the samples were found to be higher than 95%. Single phase cubic structure, microstructural density and elemental composition analysis of all the samples were studied by powder X-ray diffraction, scanning electron microscope and energy dispersive spectroscopy techniques, respectively. Raman spectroscopy analysis confirmed the formation of concentrated O^2-–vacancies in the co-doped ceria system. Impedance spectroscopy measurements revealed the high value of total ionic conductivity and low activation energy for the composition Ce_0.85La_0.075Dy_0.075O_2?δ i.e., 2.08 × 10^–2 S cm^–1 and 0.58 eV, respectively. Linear thermal expansion analyses of all the samples revealed the matched thermal expansion coefficients. Finally, these results recommend that the Ce_0.85La_0.075Dy_0.075O_2?δ sample can be useful as a solid electrolyte in IT-SOFC applications.     

Hydrogen production by hybrid system and its conversion by fuel cell in Algeria; Djanet

In this work we present a scenario of wind and solar energy production and seasonal energy storage producing Hydrogen in Djanet (East-South of Algeria). In addition we suppose assume the use of a set of fuel cells which are connected to the grid to provide a supply of energy when needed afterwards. The aim of this primary study is giving an alternative solution for the electric production in Djanet, which is mainly based on diesel generator. For that we made an investigation to highlight the potential of renewable energy production in this region. To ascertain feasibility of one hybrid system, we made energetic assessment considering the real climatic conditions of Djanet.     

New local binary pattern approaches based on color channels in texture classification

Multimedia Tools and Applications - In this paper, four novel, simple and robust approaches, which are left to right local binary patterns (LBPLL2R), top to down local binary patterns (LBPT2D),...     

Within-class multimodal classification

Multimedia Tools and Applications - In many real-world classification problems there exist multiple subclasses (or clusters) within a class; in other words, the underlying data distribution is...     

Bounding the Inefficiency of the Reliability-Based Continuous Network Design Problem Under Cost Recovery

Networks and Spatial Economics - This study defines the price of anarchy for general reliability-based transport network design problems, which is an indicator of inefficiency that reveals how much...     

Studies on the Structure and Catalytic Properties for Heck Reaction of Troxerutin Supported Palladium Catalyst

Theoretical Foundations of Chemical Engineering - Troxerutin supported palladium (TXT-Pd) catalyst was prepared readily by using one-step synthetic method. As-fabricated TXT-Pd catalyst was...     

Characterisation of the microplasma spraying of biocompatible coating of titanium

This paper presents new results of studying the influence of parameters of microplasma spraying (MPS) of Ti wire on the structure and properties of Ti coatings. Based on the design of the experiment and the results of the SEM study, certain spraying modes were chosen to form the desired composition and structure of the Ti coating.  The dense sublayer (up to 300 µm thick) provides good adhesion to the substrate, and a porous top layer can accelerate the coated implant ingrowth with the bone.  This technology is developed for the manufacture of coated endoprosthesis implants.     

Effect of Bismuth on hydrogen storage properties of melt-spun LaNi4.7-x Al0.3Bix (x = 0.0, 0.1, 0.2, 0.3) ribbons

The LaNi₅ intermetallic compound is an AB5 type hydrogen storage alloy which exhibits low operating temperature, easy activation, low pressure and tolerance to impurities. In this study, LaNi_4.7-x Al_0.3Bi_x (x = 0.0, 0.1, 0.2, 0.3) alloys were produced by melt-spinning technique and the effects of Al and Bi additions on the microstructure, thermal and hydrogen storage properties of LaNi₅ were investigated. The results showed that substitution of Ni with Al led to a desired decrease in absorption/desorption plateau pressure and hysteresis without a decrease in hydrogen storage capacity. In contrast, Bi substitution with Ni increased the absorption/desorption plateau pressure, reduced the hydrogen capacity and increased pulverization resistance of the alloy due to the formation of BiLa and AlNi₃ intermetallic phases at the grain boundaries.